Siemens SIMATIC IM 151/CPU Manual page 119

6WHS  &RQILJXULQJ WKH ,0 &38 DV D '3 6ODYH DQG WKH 6 DV D '3 0DVWHU
Change the configuration of the IM 151/CPU as shown below:
6WDJH 3URFHGXUH
1 Start the hardware configuration program as
described in step 4 for the IM 151/CPU.
•
Double-click '3 6ODYH (line X2) in the lower-left
2
part of the hardware configuration program
dialog box.
•
In the dialog box that appears, select the
2SHUDWLQJ 0RGH tab.
•
Select the '3 6ODYH option on this tab.
•
Confirm with 2..
From the 6WDWLRQ menu, choose the 6DYH DQG
3
&RPSLOH command
Close the hardware editor
Configure the S7-300 CPU as shown below:
6WDJH 3URFHGXUH
In SIMATIC Manager, select the *HWWLQJ 6WDUWHG
1
project in the left-hand part of the window.
2 Insert a new S7-300 station in the project as
described in step 4, stage 4.
3 In SIMATIC Manager, click the S7-300(1) station in
the left-hand part of the window.
Double-click the +DUGZDUH icon in the right-hand part
4
of the window.
Getting Started - ET 200S-IM 151/CPU Interface Module
A5E00058783-01
*HWWLQJ 6WDUWHG
5HVXOW
The hardware configuration editor
opens.
The hardware configuration is
compiled and saved, and the editor is
closed.
5HVXOW
The +DUGZDUH icon appears in the
right-hand part of the window.
The hardware editor is opened.
8-11