Otto Bock 21A47 Instructions For Use Manual page 12

6
7
8
6.2 Removal
Complete the following steps to take off the product:
1) Open the hook-and-loop closure on the shoulder.
2) Pull the arm out of the shoulder loop.
3) Fasten the hook-and-loop closure on the shoulder.
4) Pull the residual limb out of the socket.
INFORMATION
For putting it on the next time, the sleeve of the product does not have to be pulled off the pros­
thesis.
12
10) Lay the shoulder flaps onto the shoulder.
11) Open the hook-and-loop closure on the
shoulder.
12) With the other hand, put on the shoulder
loop.
13) Fine-tune the fit of the product with the
hook-and-loop closure on the sleeve.