Section 8 Troubleshooting - Hach LANGE TitraLab KF1000 Series User Manual

Section 8
Error/Warning
Stop requested
Measurement out of range
Temperature out of range
Temperature unknown
Temperature variation too high
Out of range
Equation calc. error
Titrant calibration has expired
Maximum number of applications is reached
Requires at least one titrant that cannot be installed The application is not compatible with applications already installed as it
Calibration solution already used
No titrant information
No measure received
Burette fails to deliver
Burette fails to fill
Burette failed to read delivered volume
Excess of titrant
Excess of water
Troubleshooting
Refer to the following table for common problem messages or symptoms and possible
causes.
Description
The operator has pushed the stop button
The measurement is out of range
The temperature measurement is out of range
The temperature measurement cannot be determined
The variation in temperature is too high
The computed result is outside accepted limits
An equation variable is unknown
The Calibration date has expired
The maximum number of applications per line has been reached
uses a different titration
The calibration solution has already been used
System failure. Contact technical support
System failure. Contact technical support
The syringe cannot be emptied
The syringe cannot be filled
System failure. Contact technical support
Too much titrant during cell conditioning
Too much water during cell conditioning
35