Manage The Data Log; Calibration; Calibrate The Titrant; Purge - Hach LANGE TitraLab KF1000 Series User Manual

6.3 Manage the data log

6.4 Calibration

6.4.1 Calibrate the titrant

6.5 Purge

To select data to view, delete or export, specify data filters
1. From the main menu, select
2. Select an option, then push Select.
Option Description
View data log Views measurement data. Select individual lines of data to view more
content.
Export data log Exports measurement data from the system to an external device. Preview
data selection before it is exported. Make sure that an external device is
connected to the instrument (e.g., a USB key, external hard drive, etc.).
Delete data log Removes measurement data from the system. Previews data selection
before it is removed.
3. Specify the data extraction parameters. Push the left and right arrow keys to make a
selection. Push the up and down arrow keys to select an option.
Option
Result type
Application
Date
Operator
1. From the main menu, select
display.
2. If necessary, select an icon for more information or to change some data.
3. Do the instructions that show on the display, then push Start to start the calibration.
Calibration data shows on the display.
4. If the default stirring speed needs to be adjusted, push the up and down arrow keys
to increase or decrease the speed.
5. When the calibration is complete, push the arrow keys to see the different
measurement views.
6. Push Continue to continue with the calibration.
7. When the calibration is complete, push Yes to accept the calibration or No to reject.
8. Push Exit to go back to the main menu.
Use this procedure to remove air bubbles from the system. Refer to
instrument for measurement
Data log.
Description
Sets the type of result available.
Sets the available applications.
Sets the date range.
Sets the available operators.
Calibration. Related information shows on the
on page 23 for instructions.
Standard operations
Prepare the
27