Section 4 User Interface And Navigation; Keypad - Hach LANGE TitraLab KF1000 Series User Manual

Section 4

4.1 Keypad

Figure 6 Keypad
1 Power
2 Printer
3 Selection keys
Key Description
Power Sets the instrument power to on or off. Push the key for 2 seconds to set the power to off.
Printer Sends data to an attached printer. The printer key only operates if a printer is connected to the
instrument.
Selection keys Shows the measurement options, selection and confirmation options. Use this key to exit the current
(contextual) menu display or open sub-menus. Available options show on the display above each key.
Navigation keys Scrolls through menus and data, enter numbers and letters, enter checkbox settings and set options
for the syringe and the pump.
Home Goes to the main menu.
User interface and navigation
Figure 6 shows the keypad and gives the key functions.
4 Navigation keys
5 Home
17