Hach LANGE TitraLab KF1000 Series User Manual page 22

Startup
Parameter
Name
Advisable syringe
Parameter
Name
Amount
Unit
Minimum amount
Maximum amount
Resolution
Parameter
Name
Parameter
Description
Parameter Description
Type Type of measurement probe
Part of name Part of the name used to identify matching electrodes if the preferred
electrode is not connected
Recommended probe Recommended probe for the application
Working mode Specify if the probe is to be used in imposed voltage (AC or DC)
Imposed current Set the value of the imposed current
Probe settling time Time to wait for the measurement to become stable before a titration
starts
20
3. Choose an application to change from the installed list and then push Edit.
4. Push the arrow keys to scroll through the application parameters. The Edit key is only
available when a parameter can be changed.
Note: Push the left and right arrow keys to go to the previous or next parameter group.
5. Push Edit to change the parameter. Enter the new details or select from a list.
Note: A description of the selected parameter is shown on the bottom of the display.
Refer to the following tables for the parameters that can be changed in basic and expert
mode.
Note: The parameters marked with an "x" are available for change.
Table 2 Application parameters
Description
Application name
Recommended syringe for the application
Table 3 Sample parameters
Description
Sample name
Sample amount
Sample unit
Minimum accepted sample amount
Maximum accepted sample amount
Number of decimals to show
Table 4 QC parameters
Description
QC name
Table 5 Blank parameters
Description
Blank description
Table 6 Probe parameters
Basic mode
x
Basic mode
x
x
x
x
Basic mode
x
Basic mode
x
Expert mode
x
Expert mode
x
x
x
x
x
x
Expert mode
x
Expert mode
x
Basic mode Expert mode
x
x
x
x