Mounting In A Rack - Cisco ME 1200 Series Hardware Installation Manual

Installation the Switch
Attaching Brackets to the Switch
Figure 2-2
1

Mounting in a Rack

After the brackets are attached on the switch, use the four supplied number-12 Phillips machine screws to
securely attach the brackets to the rack. See Figure 2-3 for standard rack-mounting using the 19-inch,
23-inch, and ETSI brackets.
Cisco ME 1200 Series Carrier Ethernet Access Devices Hardware Installation Guide
2-6
Attaching Brackets for 19-Inch, 23-Inch and ETSI Racks
Phillips flat-head screws 2 Front-mounting position
Chapter 2 Installing the Cisco ME 1200 NID
OL-31962-04