AC and DC Input Power
This chapter provides the installation instructions for the AC and DC input power for the Cisco ME1200
NID
•
•
•
•
•
Installing an AC Power Cord Retainer Clip
Follow these steps to install a AC power cord retainer clip on the switch.
Press the both side of the retainer clip and installing retainer clip through the hole on the hex screws.(see
Step 1
figure 3-1)
OL-31962-04
switches
Installing an AC Power Cord Retainer Clip, page 3-1
Installing an AC Power Cord, page 3-2
Installing an AC-to-DC Power Adapter, page 3-2
Wiring the DC Input Power Source, page 3-3
Grounding the Switch, page 3-4
Cisco ME 1200 Series Carrier Ethernet Access Devices Hardware Installation Guide
3
C H A P T E R
3-1