Cisco ME 1200 Series Hardware Installation Manual page 40

SFP Module Cabling
Figure B-2
Figure B-3
Figure B-4
SFP Module Cabling
Each port must match the wave-length specifications on the other end of the cable, and for reliable
communications, the cable must not exceed the required cable length. Copper 1000BASE-T SFP
transceivers use standard four twisted-pair, Category 5 (or greater) cable at lengths up to 328 feet
(100meters).
Cisco ME 1200 Series Carrier Ethernet Access Devices Hardware Installation Guide
B-2
Duplex LC Cable Connector
Simplex LC Cable Connector
Copper SFP Module RJ-45 Connector
Appendix B Connector and Cable Specifications
OL-31962-04