Cisco ME 1200 Series Hardware Installation Manual page 34

Grounding the Switch
Figure 3-7
Attach the dual-hole lug and the wire assembly to the chassis ground connection with the supplied screws (see
Step 5
Figure 3-8).
Figure 3-8
Use a ratcheting torque Phillips-head screwdriver to torque the ground-lug screws to 32 in-lb.
Step 6
Connect the other end of the grounding wire to an appropriate grounding point at your site or to the rack.
Step 7
Cisco ME 1200 Series Carrier Ethernet Access Devices Hardware Installation Guide
3-6
Crimping the Ground Lug
Attaching the Ground Lug and Wire Assembly
Chapter 3 AC and DC Input Power
OL-31962-04