19.8.2 The charger
The purpose of the charger is to automatically charge the storage
batteries. The charger is housed in splashproof sheet-steel casing. It
complies with the guidelines and protection requirements of the:
›
Low Voltage Directive 2006/95/EC,
›
Electromagnetic Compatibility Directive 2004/108/EC.
L
L
Read the operating instructions included separately with the
charger.
19.8.3 Installing the charger, installation site
›
Only install in dry rooms.
›
Do not cover casing openings.
›
Ensure sufficient ventilation.
›
Do not install near to radiant heaters (e.g. under lamps, on heaters
etc.)
L
L
During the charging process, put the charger on the foot
supports of the wheelchair.
110
Fig. 71: Set up charger
Technical equipment