Loading And Transport Of The Biolution; Rules For Loading Wheelchairs - Paravan PR Biolution User Manual

13. Loading and transport of the Biolution

L L
The Biolution must always be shut down and correctly secured or fastened in the vehicle during
transport. For loading the Biolution, loading aids like:
› ramps, lifts and hoists
with sufficient load-bearing capacity must be used.

13.1 Rules for loading wheelchairs

The following rules must be observed for and during loading:
› The maximum support height specified on the ramp must be greater than the height from the ground to
the support edge to be cleared (e.g. in the case of a car, the car boot area).
› Check the loading capacity of the ramp(s), of the lift or the hoist.
› Due to safety reasons, the Biolution must only be loaded into cars or on split ramps unoccupied (without
baggage or a person).
› Loading must only be carried out by a person who can safely operate the Biolution.
› A Biolution which is unfit to drive must only be loaded by your authorised specialist workshop. This
workshop is the only entity aware of the possible danger situations and how to counter them.
Loading and transport of the Biolution
77