ANSWERING A CALL
When the device is in idle and there is an incoming call, the device will show the call screen as below.
Figure 26 GAC2500 Single Incoming Call Screen
Select "Answer" to answer the call, or reject the call by pressing the "Reject" softkey.
When there is an incoming call during an active call, users will hear a call waiting tone with the LCD
displaying the caller name and ID for the incoming call.
Figure 27 GAC2500 New Incoming Call Screen
Users could select "Answer" to answer with audio only, or eject the call by pressing the "Reject" softkey.
REJECT CALL VIA SMS
Users could reject incoming calls via messages. Please access Notices application
on desktop
and tap on Settings
on the upper right corner, and enable "Enable Quick Reply". You can also
Firmware Version 1.0.1.34
GVC2500 User Guide
Page 43 of 105