Figure 29 Gac2500 Call On Hold Screen - Grandstream Networks GAC2500 User Manual

CALL HOLD AND CALL RESUME
CALL HOLD
During the active call, press HOLD
answer a new call. It shows as follows:
RESUME TO CALL
If the active call is on hold, users could press the "Unhold" button to resume call or tap on the "End"
button to hang up the call.
CALL RECORD
Users could save the call conversations to the GAC2500 by recording during an active call. You can listen
to the recordings from Recorder, please refer to the chapter Recorder for details.
1. During an active call, tap on the "Start Recording" softkey in the bottom to start recording as shown
in the figure below:
Firmware Version 1.0.1.34
button to put the current call on hold. Users could then make or

Figure 29 GAC2500 Call On Hold Screen

GVC2500 User Guide Page 45 of 105