Figure 32 Gac2500 Transfer - Blind Transfer - Grandstream Networks GAC2500 User Manual

Audio conference phone for android

Hide thumbs Also See for GAC2500:

Table of Contents

The result of step 4 and 5 may differ because of SIP servers. The result described below is based on

Grandstream SIP server.

BLIND TRANSFER

User A and user B are in an active call.

User A tap on Transfer button to bring up the transfer screen;

Set the transfer mode to Blind .The default mode is Blind;

Enter the digits and press the SEND to transfer the call with user B to User C. When user C's phone

rings, the phone interface of user A is shown in figure 32. If user C answers the call, user A will

automatically go back to the idle screen, which indicates the successful transfer;

User C's phone will ring, the phone with CID function will display user B's number on screen as the

caller.

Note:

If inputted the wrong digits, press the button

button to empty all digits.

Users could drag up the bottom of LCD and tap on Back icon to go back to the active call interface if

wants to cancel transfer.

ATTENDED TRANSFER

There are two ways of attended transfer: Call Forward and Call Transfer.

Firmware Version 1.0.1.34

Figure 32 GAC2500 Transfer - Blind Transfer

GVC2500 User Guide

to delete the digit one by one, or long press the

Page 47 of 105

Table of Contents