Direct Ip Calls; Answer A Call; Single Incoming Call - Grandstream Networks GAC2570 User Manual

Hide thumbs Also See for GAC2570:
Table of Contents

Advertisement

2. Incoming and outgoing calls are displayed in the "Conference" in the form of
meetings, and missed calls are displayed in the "Missed".
3. Navigate to the call history list by selecting the call history category and
sliding up/down on the screen.
4. Tap on the entry to show more details or tap on
GAC2570 Call History

Direct IP Calls

Direct IP Call allows two phones to talk to each other in an ad-hoc fashion
without a SIP proxy. VoIP calls can be made between two phones if:
Both phones have public IP addresses; or
Both phones are on the same LAN/VPN using private or public IP addresses;
or
Both phones can be connected through a router using public or private IP
addresses (with necessary port forwarding or DMZ).
To make a direct IP call, please follow the steps below:
1. On the shortcuts menu of the idle screen, tap on
dial screen.
2. Input the target IP address (For example: if the target IP address is
192.168.1.60, input the following: 192*168*1*60. The * key represents the dot
(.) ).
3. Tap on
or # keyto send the number. If no key is pressed, by
default the call will be automatically dialed out after 4 seconds timeout.
Note:
When completing a direct IP call, the "Use Random Port" option should be set
to "No".

Answer a Call

Single Incoming Call

When the device is idle and there is an incoming audio call, the device will
show the call screen as below. Tap on the "Answer" softkey to answer the call
via built-in speaker and Microphones.
to dial out.
icon to open the

Advertisement

Table of Contents
loading

Table of Contents