Note:
Please ask network administrator for configuration.
VLAN SETTINGS
Access GAC2500 home screen, go to Settings->Advanced settings->Wireless & network->Additional
network settings to configure VLAN settings on the GAC2500.
Table 7 GAC2500 VLAN Configuration Parameters
Parameters
Layer 2 QoS
802.1q/VLAN Tag
Layer 2 QoS
802.1p Priority
LLDP SETTINGS
Access GAC2500 home screen, go to Settings->Advanced settings->Wireless & network->Additional
network settings to configure LLDP settings on the GAC2500.
Table 8 GAC2500 LLDP Configuration Parameters
Parameters
LLDP
Layer 3 QoS for
SIP
Layer 3 QoS for
Audio
Layer 3 QoS for
Video
802.1X MODE
Access GAC2500 home screen, go to Settings->Advanced settings->Wireless & network->Additional
Firmware Version 1.0.1.34
Descriptions
Assigns the VLAN Tag of the Layer 2 QoS packets for LAN port. The default value is
0.
Note:
Please do not change the setting before understanding the VLAN's settings or consulting the
network administrator. Otherwise, the device might not be able to get the correct IP address.
Assigns the priority value of the Layer 2 QoS packets. The default value is 0.
Descriptions
Enable or disable LLDP. The default setting is disabled.
This field defines the layer 3 QoS parameter for SIP packets. It is the value used for
IP Precedence, Diff-Serv or MPLS. The Default value is 48.
This field defines the layer 3 QoS parameter for audio packets. It is the value used
for IP Precedence, Diff-Serv or MPLS. The Default value is 48.
This field defines the layer 3 QoS parameter for video packets. It is the value used
for IP Precedence, Diff-Serv or MPLS. The Default value is 48;
GVC2500 User Guide
Page 38 of 105