network settings->802.1X Mode. By default 802.1X is disabled. Select 802.1X mode to "EAP-MD5",
"EAP-TLS5" or "EAP-PEAP" to turn on 802.1X. Once 802.1X mode is enabled, the user will be required
to enter the identity and Password to be authenticated in the network.
Table 9 GAC2500 802.1X Mode Parameters
Parameters
802.1x Mode
Identity
MD5 Password
CA Certificate
Client Certificate
Private Key
Firmware Version 1.0.1.34
Descriptions
Allows the user to enable/disable 802.1X and configure 802.1X mode. The default
setting is disabled.
Enter the Identity information for the 802.1X mode.
Enter the MD5 Password for the 802.1X mode.
Upload the CA certificate for the 802.1X mode.
Upload the CA certificate for the 802.1X mode.
Upload the private key for the 802.1X mode.
GVC2500 User Guide
Page 39 of 105