1
INTRODUCTION
Thank you for purchasing "ProJet® 3-D Printing System . We pride ourselves in our ability to offer customers three dimensional printing
solutions. The 3D System team is confident your system will provide many years of service.
2
ABOUT THIS GUIDE
•
Safety: Read prior to handling VisiJet® Materials or operating the printer . The safety sections describe how to safely handle the
print material to avoid damage and injury when operating the printer . For more detailed material safety information, refer to the
VisiJet® Material Handling
•
System Requirements: Provides electrical requirements necessary to run your printer . For more detailed facility requirements
information, see the
ProJet® 3-D Printers Facility Requirements
•
Familiarization: Provides a brief description of the printer system .
•
Printer Setup: Provides information on preparing the printer for printing using the software, and how to send test and demo builds
to the printer from your computer . Also refer to your online help for software instructions .
•
Operations: Describes loading and running the printer; start and stop build jobs; monitor and control build jobs; unload build parts;
and disposing waste material .
•
Error Messages: Defines the error messages you may see on the printer's operator's panel and provide the actions to take.
•
Finishing: Provides information on finishing parts.
•
Maintenance: List printer maintenance procedures which must be done to ensure high part yield and low printer down time .
Semi-annual preventive maintenance requires a certified 3D Systems Technical Support Representative.
•
Troubleshooting: If problems occur with the printer, look for solutions in this section first. It describes some common problems
which can occur and suggests corrective actions .
•
Technical Support: List of contact numbers of sale and support personnel for your printer system .
3D Systems, Inc.
Guide .
Guide .
5