Irritant; Inhalation; Handling Finished Parts; Hygienic Practices - 3D Systems ProJet 3500 Max Series User Manual

HEALTH HAZARDS / IRRITANT

Irritant

• Uncured VisiJet® part material is a sensitizer . Skin or eye irritation could occur when exposed to the chemical composition of the
material .
• Any chemical may exert harmful effects if contacts or enters the body . VisiJet® part material is a sensitizer and irritant .
• Skin Sensitization
• Uncured VisiJet® part material is a sensitizer . Skin or eye irritation could occur when exposed to the chemical composition of the
material .
• Uncured material is a sensitizer, and can cause allergic reactions if contacts skin without protective gloves . Refer to personal pro-
tection equipment for more information . To avoid sensitization, do not allow uncured material to contact skin . Consult the MSDS for
specific information about the sensitization potential.

Inhalation

• Under normal operation, inhalation is not an expected route of entry .
• Ingestion
• Uncured VisiJet® part material is toxic if ingested .
• Uncured material is toxic if ingested . Uncured material must not be present where food and drink are stored, prepared, or con-
sumed and not ingested . After handling materials, wash hands with soap and water before consuming or preparing food .

Handling Finished Parts

• Finished (cured) parts can be handled or disposed of the same as standard household plastic products . VisiJet® parts are not
recyclable . VisiJet® materials are not intended for and cannot be used for medical implant, or food or drink handling applications .
• Exposure control
• The printer has a variety of built-in engineering controls which are designed to prevent operator exposure . Do not try to change or
disable these controls .

Hygienic Practices

• Appropriate hygienic practices should be followed, including washing with soap and water before meals, breaks, smoking, applying
cosmetics, using toilet facilities, and after work .
• Employees should be alerted to the need to clean and rinse off any contacted surface promptly in order to prevent further contami-
nation . Ensure a convenient washroom location is provided with access to soap, water, and disposable paper towels .
3D Systems, Inc.
15