Introduction; Copyright; Getting Help; Support - 3D Systems Cube Print Documentation

1

INTRODUCTION

Thank you for purchasing a 3D Printer from 3D Systems.
The Cube Print mobile app is designed to help you in your 3D-printing process, and enables you to monitor and control your Cube or
EKOCYCLE printer while its printing. Use the Windows or Mac version, available at 3dsystems.com, to setup and send prints to the
printer.
This document will guide you how to use the Cube Print mobile app.
For more information on using your printer, please see the printer's User Guide avaliable at

COPYRIGHT

©2016 by 3D Systems, Inc. All rights reserved. This document is subject to change without notice. This document is copyrighted and
contains proprietary information that is the property of 3D Systems, Inc. The 3D Systems logo, 3D Systems, and Cube are registered
trademarks of 3D Systems, Inc.
©2015 The Coca-Cola Company. "EKOCYCLE," the EKOCYCLE Glyph, the EKOCYCLE Flag, and the Contour Bottle Design are
trademarks of The Coca-Cola Company.
The EKOCYCLE filament contains 25% recycled materials, using an average of 3 assorted recycled 20oz PET bottles.

GETTING HELP

Select Help in the menu to open this help document. Or check the printers

SUPPORT

Please go to www.3dsystems.com/store/support
3D Systems, Inc.
User Guide
to get support.
2
3dsystems.com
available at 3dsystems.com.