Hanger Kit Installation - Honda EB10000 Owner's Manual

ASSEMBLY

Hanger Kit Installation

1. Remove the center beam.
2. Loosely install the hanger to the center beam using the hanger bracket and
two 8×20 mm flange bolts.
3. Reinstall the center beam. Make sure to tighten the four 8×16 mm bolts
securely.
4. Position the hanger at the generator's center, and tighten the two 8×20 mm
bolts securely.
Torque: 19.5 lbf·ft (26.5 N·m, 2.7 kgf·m)
16
8×20 mm FLANGE BOLT (2)
HANGER BRACKET
CENTER BEAM
HANGER
8×16 mm
FLANGE BOLT (4)