Honda EB10000 Owner's Manual page 86

STORAGE
2. Pull out the carburetor drain tube end under the fan cover of the engine, and
place it in a suitable container.
3. Remove the air cleaner cover (see page 44).
4. Loosen the carburetor drain screw.
If the drain screw is difficult to loosen, wrap duct tape around the screwdriver
stem until the diameter becomes 8 mm as illustrated. By doing so, the
screwdriver is easily inserted into the cutout portion of the drain bolt, and
you can loosen the drain bolt easily.
5. Drain the gasoline from the carburetor into the container.
6. Tighten the carburetor drain screw securely.
7. Install the air cleaner cover (see page 44).
CARBURETOR DRAIN SCREW
84
DUCT TAPE
CARBURETOR DRAIN TUBE