Air Cleaner Service; Foam Air Filter Cleaning - Honda EB10000 Owner's Manual

SERVICING YOUR GENERATOR
6. Tighten the oil filler cap securely. Close the maintenance cover.
Wash your hands with soap and water after handling used oil.
OIL FILLER CAP

AIR CLEANER SERVICE

Foam Air Filter Cleaning

A dirty foam air filter will restrict air flow to the carburetor, reducing engine
performance. If you operate the generator in very dusty areas, clean the foam
air filter more frequently than specified in the Maintenance Schedule.
1. Clean the foam air filter in warm soapy water, rinse, and allow to dry
thoroughly, or clean in non-flammable solvent and allow to dry.
2. Dip the foam air filter in clean engine oil, and then squeeze out all excess oil.
The engine will smoke when started if too much oil is left in the filter.
Clean
3. Wipe dirt from the air cleaner housing and cover using a moist rag. Be careful
to prevent dirt from entering the air duct that leads to the carburetor.
68
FUNNEL
Squeeze and Dry
Do not twist.
SEALING WASHER (Replace)
OIL DRAIN BOLT
Squeeze
Dip in Oil
Do not twist.