Notes On Configuring Ipui; Ipui Code Configuration; Handset Registration Center - Yealink W80 Administrator's Manual

Administrator's Guide for W80 DECT IP Multi-Cell System

Notes on Configuring IPUI

A few notes you should know when registering handsets using IPUI code:
The registration status will not be disabled automatically if you enable it by "handset.X.reg.enable".
l
If you duplicate the IPUI code during the configuration, only the IPUI with the smaller handset number takes
l
effect.
If you configure another IPUI code for another handset but the handset number is the same as an existing one,
l
the existing IPUI will be overwritten.
If you configure the IPUI code for the registered handset, the handset will be unregistered.
l
When the handset is deleted, the handset and its IPUI code will be deleted at the same time.
l
You cannot directly modify the IPUI code via the web user interface. The IPUI code can only be modified via auto
l
provisioning, or re-entered after deleted via the web user interface.

IPUI Code Configuration

The following table lists the parameters you can use to import the IPUI code.
Parameter handset.X.reg.enable
It enables or disables the registration status for handset X.
Description
Note: The value of X corresponds to that of "account.X.user_name". When the IPUI code is invalid or
not configured, the registration status cannot be enabled by this parameter.
0-Disabled
Permitted
Values
1-Enabled
Default
0
Web UI Handset & Account > Handset Registration > Add Handset > Start Register Handset
Parameter handset.X.ipui
It configures the IPUI code of handset X.
Description
Note: The IPUI code is not case sensitive.
Permitted
String within 10 characters (only contain numbers and letters)
Values
Default Blank
Web UI
Handset & Account > Handset Registration > Add Handset > IPUI
[1]
X is the handset ID. X=1-100.
Related Topics
Obtaining the IPUI Code of the Handset

Handset Registration Center

The registration center allows you to register groups of handsets in one registration process. During this time, the
system will automatically register the handset and assign the corresponding account according to the IPUI code.
You can find the following information from the registration center:
Total Handsets: Shows how many handsets are registered in the current system.
l
Registered Handsets: Shows how many handsets are registered through the registration center this time
l
Current Time: Shows the current system time. It is updated in real time.
l
Topics
32
[1]
[1]
<MAC>.cfg
<MAC>.cfg