Customizing the Replace Rule File
1. Open the replace rule file.
2. To add a replace rule, add <Data Prefix="" Replace="" LineID="" / > to the file. Each starts on a new line.
3. Specify the values within double quotes.
For example,
<Data Prefix="2512" Replace="05922512" LineID="1" / >
4. Save the changes and place this file to the provisioning server.
Dial Now File Customization
The dial now file helps create multiple dial now rules. At most 20 dial now rules can be added to the IP phone.
You can ask the distributor or Yealink FAE for dial now file template. You can also obtain the dial now file template
online: http://support.yealink.com/documentFront/forwardToDocumentFrontDisplayPage.
Topics
Dial Now File Attributes
Customizing the Dial Now File
Dial Now File Attributes
The following table lists the attributes you can use to add dial-now rules to the dial now file:
Attributes
DialNowRule
Specify the dial-now number.
Specify a registered line to apply the dial-now rule.
Valid Values: 0-100
LineID
0 stands for all lines;
1~100 stand for line1~line100
Multiple line IDs are separated by commas.
Customizing the Dial Now File
1. Open the dial now file.
2. To add a dial-now rule, add <Data DialNowRule="" LineID="" / > to the file. Each starts on a new line.
3. Specify the values within double quotes.
For example,
<Data DialNowRule="1001" LineID="0" / >
4. Save the changes and place this file to the provisioning server.
Replace Rule Configuration
You can configure replace rules either one by one or in batch using a replace rule template.
The following table lists the parameters you can use to configure the replace rule.
Parameter dialplan.replace.prefix.X
Description It configures the entered number to be replaced.
Permitted
String within 32 characters
Values
Default
Blank
[1]
Description
<y0000000000xx>.cfg
Call Features
185