Maico PILOT TEST Operation Manual page 34

5.5.7 Device Information
Figure 27
5.5.8 Set date and time
Figure 28
5.5.9 Display Contrast
Figure 29
Rev.
8504660 3
Operation Manual PILOT TEST
General information can be found here (Figure 27).
• PILOT TEST: The firmware release date and
version installed on the device.
• Hardware ID: Internal serial number of the device.
• Version: Calibration standard selected.
• Date: Date device was calibrated.
Set the correct date and time of the device for
printing of tests (Figure 28).
Move to the

arrow keys. To make a change, use the
arrow ▲ ▼ keys.
• Date: Set the current date.
• Date format: Select the preferred date format to
be displayed on the printout.
• Time: Set the current time. Hour and minute are
selectable for change. If time format 12H is
chosen AM/PM will be displayed.
• Time format: Select the preferred clock,
using the 12H or 24H time format.
By pressing the
display can be adapted to your preference
(Figure 29).
32
available field
 
(light) or (dark) key the
with the
06/11/2019