Table 12 Audiometry menu
ITEM
EXPLANATION
Results are displayed with:
Display type
• Graph: The level and frequency of the response is highlighted by a
• Table: The response in the table view is stored as a numerical value
Test mode
Selection of the operation mode:
When On, the next frequency is selected upon storing the result. If
Frequency
this function is switched Off, the next frequency must be selected
change after
by pressing the arrow
saving
Change to hearing level when frequency is changed.
Level after
frequency
change
NOTE: This setting also defines the start level with a new test. Remain
and Return to 30 dB start level is 30 dB HL. Return to minimal level
and Decrease by 30 dB start level is -10 dB HL.
Rev.
8504660
3
red
O
for the right ear and blue
connected by lines when octave frequencies are tested (Figure 21).
Figure 21
under the frequency and ear tested (Figure 22).
Figure 22
• Presenter: Tone is presented when the Tone
touched.
• Interrupter: Tone is interrupted/stopped when the Tone
key is touched.
• Remain: The hearing level does not change with the frequency change.
• Return to minimal level: The hearing level at the next frequency is -10 dB.
• Decrease by 30 dB: The hearing level at the next frequency
is decreased by 30 dB.
• Return to 30 dB: The hearing level at the next frequency is 30 dB.
Operation Manual PILOT TEST
X
for the left ear. The results are
keys.
30
key is
06/11/2019
Need help?
Do you have a question about the PILOT TEST and is the answer not in the manual?