Troubleshooting - Maico PILOT TEST Operation Manual

5.5.10 Reset to Default
Figure 30
Figure 31

5.6 Troubleshooting

If your device is no longer working properly, see Table 13.
Table 13 Troubleshooting
PROBLEM REASON
Lamps do not Lack of
light up power
supply
No sound Disturbed
from connection
headphone
No sound Disturbed
from monitor connection
phone
Printing is not Disturbed
possible connection,
lack of paper
NOTE: If there are any problems that you cannot solve yourself, please contact your local
distributor.
Rev.
8504660 3
Operation Manual PILOT TEST
Returns device settings to factory defaults by
pressing the Enter
any other key to return. Once entered a
secondary menu is displayed to confirm
selection (Figure 31).
SUGGESTION
• Is the power switch on?
• Is the power cord plugged in correctly in the power
connector?
• Is the wall outlet working?
• Is the headphone cable plugged in correctly to the
socket?
• Is the lead loose or defective?
• Is the cord cracked or bent?
• Is the cable plugged in correctly to the socket?
• Is the lead loose or defective?
NOTE: Monitor is only available for PILOT TEST, not
Audiometry.
• Is the printer cable connected to the device and printer?
• Is the printer on?
• Is there paper in the printer?
33
key (Figure 30). Press
06/11/2019