Audiometry Testing - Maico PILOT TEST Operation Manual

5.2.6 Testing Both Ears (Binaural)
To test both ears at once, press the L/R
screen. Complete the test in the same manner as the right ear. Mark the test results
in the B column of the evaluation pad.
NOTE: The test results of a binaural test are typically a little better than the test results
of a single ear. Binaural testing must first be enabled in the PILOT TEST Menu (see
Section 5.5.3).
5.2.7 Changing the Test Language
To change the language the child hears during the test, press Menu
arrow  key until PILOT TEST speech language is highlighted and press Enter
next screen will show you the language options that are programmed into the device.
Press the arrow  key until the language you wish to select is highlighted and press
Enter . Select the Menu
5.2.8 Adjusting Volume of Monitor Phone
Press the ▲ or the  keys to increase and decrease the volume through the monitor
phone while the PILOT TEST is in progress. The monitor phone is only active for the
PILOT TEST.

5.3 Audiometry Testing

The Audiometry test investigates the hearing threshold of the patient and offers a
frequency-specific test result.
5.3.1 Audiometry Control Keys and Display
Figure 7
Figure 8
Rev.
8504660 3
Operation Manual PILOT TEST
key to exit and return to the test screen.
Audiometry uses the arrows and silver bar on the right side of
the device for test operation (Figure 7). To enter the
audiometry screen press the Audiometer
NOTE: The Audiometry display has two options, graph view
(Figure 8) or table view (Figure 9). See Section 5.5.4 on
Display type.
key until the letter B appears on the
Figure 9
22
. Select the
. The
key.
06/11/2019