japa
485
A
DEACTIVATE THE MACHINE AND DISCONNECT THE POWER SOURCE BEFORE PERFORMING
MAINTENANCE, UNLESS OTHERWISE INSTRUCTED!
AFTER MAINTENANCE, ALWAYS REATTACH ALL THE GUARDS YOU HAVE REMOVED AND CHECK
THE OPERATION OF THE SAFETY DEVICES BEFORE BEGINNING OPERATION!
BE PARTICULARLY CAREFUL WITH THE MOVING PARTS IF YOU ADJUST THE RETURN ROLLER
WHILE THE MACHINE IS RUNNING.
Translation
Tension the conveyor belt by moving the return
roller.
Ensure that the belt runs straight after the
adjustment, i.e. move the return roller the same
amount from both ends.
B
A. Oil level cap
B. Breather cap
Open the oil level cap A. There is a sufficient
amount of oil when the oil level is at the lower
edge of the inspection opening.
If necessary, add oil through the breather cap (B).
27
User manual
485 1.0-2014