Connections - Japa 485 User Manual

japa
485

2.7 Connections

Various hydraulically or electrically driven accessories can be connected to the Japa 485 firewood
processors.
Translation
A. Series connection of the input conveyor
A feed roller (JA4652 or JA4655), which operates
simultaneously with
connected to the series connection.
NOTE! If the device is used without a feed roller, a
loop hose must be connected to the series
connection.
B. Continuous output
Continuous output is required when using the
hydraulic dust extractor (JA47950) or cleaning drum
(JA475H).
NOTE! Also connect the overflow hoses of the
output conveyor to the overflow line with a T
branch.
NOTE! Always adjust the conveyor's relief valve if
you connect or
accessories (5.4.4).
C. Additional hydraulics controlled with a
separate valve
Additional hydraulics can be used to control the
chain conveyor of the timber deck (JA46501), for
example.
D. Mains power socket (230V/10A)
The electrical dust extractor (JA47940) can be
connected to the machine's power socket. If this is
done, the accessory will activate at the same time
as the firewood processor.
NOTE! MAX 2000 W
NOTE! TRE models
14
User manual
the input conveyor,
disable continuous
485 1.0-2014
is
output