Maintenance And Troubleshooting; Maintenance Table - Japa 485 User Manual

japa
485

5. Maintenance and troubleshooting

5.1 Maintenance table

A maintenance programme has been designed for the Japa firewood processor to ensure that its
service life is as long as possible. The owner is responsible for maintaining the device. Using the
machine carelessly and neglecting maintenance may void the guarantee. The maintenance tasks are
itemised as follows:
- 10 hrs
- 200 hrs
every six months (every other year with little use)
When the machine is used for less than 200 hrs/year, the 200 hr maintenance is performed as the annual
maintenance and the 1,000 hr maintenance is performed every other year.
MAINTENANCE TARGET
A Splitting valve
B Cutting blade
C Splitting knife
D Output conveyor, bearings
E Output conveyor, belt
F Blade lubrication oil
G Transmission, oil
H Hydraulic oil
Normal conditions
Oil filter
I
Electrical equipment
Machine operation
Safety equipment
E
Translation
Daily maintenance,
Monthly maintenance (once a year with little use)- 1,000 hrs
TASK
Lubrication
Check
Replace
Check
Sharpen
Lubrication
Tighten
Fill
Check
Replace
Check
Replace
Replace
Clean
Check
Check
to be conducted before use.
INTERVAL INTERVAL
10 hrs 200 hrs
x
x
x
x
x
x
x
x
x
x
x
I G
D
C
23
User manual
Maintenance
INTERVAL
SUBSTANCE/ITEM
1,000 hrs
Lubrication oil
As necessary
As necessary
Ball bearing grease
Saw chain oil (9.0 l)
SAE 80W-90
500 ml (0.5 l)
x
ISO 46 S/140 l
x
94134/2 pcs
x
B
H
F
A
485 1.0-2014