Blade Lubrication - Japa 485 User Manual

japa
485

3.6 Blade lubrication

The Japa 485 firewood processor is equipped with a separate blade lubrication system. Ensure that there
is a sufficient level of lubrication oil through the sight glass. Add oil if necessary. The capacity of the blade
oil tank is 9 litres.
DO NOT PLACE YOUR HAND NEAR THE CUTTING BLADE WHEN THE MACHINE IS
RUNNING!
DO NOT HOLD THE SAW HANDLE IN ONE POSITION LEAVING THE CHAIN RUNNING
CONSTANTLY!
USE PURE MINERAL OILS INTENDED FOR BLADE LUBRICATION ONLY.
DO NOT USE BIO OR WASTE OIL!
Translation
A. Blade lubrication system
1. Filler opening
1
2. Sight glass
2
18
User manual
485 1.0-2014