Removal Of Blades And Blade Adapter - Husqvarna 967187001 Workshop Manual

7.10 Removal of Blades and Blade
Adapter
The cutting deck should be in service position,
see "5.6".
WARNING!
Use gloves and protective
goggles when working on the
cutting deck.
WARNING!
Always disconnect cables from the
cutting deck before removal
1
Lock the blade with a wooden block.
2
Loosen the blade bolt and remove the blade bolt,
washer and blade.
3
Loosen the two screws holding the blade adapter
to the motor shaft.
Repair Work
43
English –