Husqvarna 967187001 Workshop Manual page 101

In Cable 2, +5 V goes to the microswitch for
cutting deck activation, which is mounted by
the cutting deck lifting lever. The microswitch is
activated when the cutting deck is lowered. +5 V
also goes to the seat switch, control panel and
battery connector in the charger. The switches for
activating the cutting deck and seat, and finally, the
battery charge connector.
Cuttingdeck safetyswitch
Cuttingdeck on switch 1
Cuttingdeck on switch 2
Seat switch
Charging connector mounted in the machine
CST Autotest
101
English –