Cutting Deck; Service Position For Cutting Deck; Removing The Bioclip Plug - Husqvarna 967187001 Workshop Manual

Design and Function

5.5 Cutting Deck

The whole Rider range is equipped with front-
mounted cutting deck to mow efficiently even in
confined spaces.
Rider Battery has a Combi Deck with a cutting
width of 850 mm (33.5")

5.6 Service Position for Cutting Deck

Service Position means the cutting deck is removed
(see "6.5" for removal of the cutting deck) and
located so that the underside is accessible. The
deck can be placed against a wall.
WARNING! Always disconnect
cables from the cutting deck
before removal

5.7 Removing the BioClip Plug

To change a Combi Deck from the BioClip function
to a cutting deck with rear ejection, remove the
BioClip plug, which is located under the cutting
deck, attached with a screw.
1
Set the cutting deck to service position, see "5.6".
2
Loosen the screw holding the plug and remove it.
3
Assemble the cutting deck (see "6.5")
4
Fit the BioClip plug in the reverse order.
18
English –
Combi Deck