Changing Fuses - Husqvarna 967187001 Workshop Manual

Rider battery
Table of Contents

Advertisement

Repair work electrical components

8.6 Changing Fuses

WARNING!
Working on a live machine can cause
lethal injury.
Disconnect the batteries, see Chapter 2.12
IMPORTANT INFORMATION
The fuses are intended to protect the
electrical system. If the new fuse blows
again shortly after replacement, it is due to a
short circuit, which must be fixed before the
machine can be put into operation again.
Main fuse of 150 A is located in the fuse holder in
front of the battery under the protective cover.
Under the same cover is an 80 A fuse for the
cutting motors.
Type: Vehicle fuse
5 A
to: CCU Color: Beige
15 A to: Charge Current. Color: Blue
30 A to: Brake resistance. Color: Green
Do not use any other type of fuse when changing.
A blown fuse is indicated by a burnt link. Pull the
fuse from the holder when replacing it.
Battery fuse of 150 A is located under the seat.
76
English –

Advertisement

Table of Contents
loading

Table of Contents