Assembling The Contain-It Plus Ball Valve Type 546 - GF CONTAIN-IT Plus Instruction Manual

Ball valve

Table of Contents

Available languages

Instruction Manual

5.5

Assembling the CONTAIN-IT Plus Ball Valve Type 546

1. Move the protective housing over the

ball valve.

2. Plug the stem through the hole in the

protective housing onto the ball valve .

3. Please make sure that the stem is in

the right position. Therefore please

consider the outline of the stem and of

the ball valve.

4. Check if the stem is flush with the

bottom of the connecting element.

Fig. 7

Fig. 8

Fig. 9

Fig. 10

Installation

Table of Contents

Table of Contents

Do you have a question about the CONTAIN-IT Plus and is the answer not in the manual?

546