Huawei SmartLi 2.0 User Manual page 95

SmartLi 2.0
User Manual
The UPS software needs to be upgraded to the version that supports lithium
battery connection. See
the version number.
Step 2 Press and hold the POWER ON/OFF button on the BCU for more than 2s. The
green indicator of the BCU blinks at short intervals.
● The BCB off alarm (the red indicator is steady on) is displayed on the UPS LCD
● The green indicator blinks intermittently. After 1 minute, the BCU starts. The
● If multiple SmartLi cabinets are combined, press and hold the POWER ON/OFF
Step 3 Set the language, time, date, network parameters, and system parameters on the
Settings Wizard screen of the SmartLi.
Figure 6-1 Settings Wizard
Issue 03 (2020-08-07)
NO TICE
NO TICE
and SmartLi LCD. No action is required. After the battery circuit breaker is
switched on, the alarm is automatically cleared.
green indicator blinks at super short intervals and the red indicator is steady
on.
button on the BCU of the master cabinet for more than 2s to power on the
master cabinet. Then, power on slave cabinets one by one in the same way.
Copyright © Huawei Technologies Co., Ltd.
UPS5000 The Relationship of Software Version to check
6 Operations
88