Huawei SmartLi 2.0 User Manual page 122

SmartLi 2.0
User Manual
LCD
Choose Maintenance > USB Operations > Upgrade Software, tap Upload, and
find the correct package in the corresponding path. After the upload is complete,
tap Details. On the screen displayed, select All, tap Activate, and perform
operations as prompted.
Figure 9-5 Uploading and activating the software (the BCB of a single battery
cabinet is ON)
Issue 03 (2020-08-07)
NO TE
1. The method for uploading and activating the software when the BCBs of all battery
cabinets in a parallel system are ON or OFF is the same as the method for uploading
and activating the software when the BCB of a single battery cabinet is OFF.
2. The system starts the upgrade process. If the BCBs of all battery cabinets are OFF before
the start, the MDU and all the battery cabinets are upgraded concurrently. If the BCBs of
all battery cabinets are ON before the start, the MDU and the battery cabinets (battery
cabinet 1, battery cabinet 2, ..., and battery cabinet
upgrade progress is displayed in the Status column. During the upgrade of the MDU,
the message "The MDU will restart to complete the upgrade process. Log in again after
2 minutes." is displayed. Click OK. The MDU will restart to complete the upgrade
process. Wait for about 2 minutes and log in to the WebUI again.
Copyright © Huawei Technologies Co., Ltd.
9 Parts Replacement
N ) are upgraded one by one. The
115