Huawei SmartLi 2.0 User Manual page 76

SmartLi 2.0
User Manual
Default
User
browser
(browsing
user)
Procedure
Step 1 Connect the network port of the PC to the FE port of the monitoring interface unit
using a network cable
Step 2 Open the browser and choose Tools > Internet Options.
Step 3 Click the Advanced tab, check that Use TLS 1.0 and Use TLS 1.1 are selected, and
click OK, as shown in
Figure 5-1 Settings in the Internet Options dialog box
Step 4 Enter https://SmartLi IP address in the address box of the browser, select a
language, set User name and Password, and click Login. The system supports
Internet Explorer 11 and Firefox 31.0.
Issue 03 (2020-08-07)
Preset Password
WebUI
NO TE
● If an incorrect password is entered five consecutive times, the account will be logged out
for 5 minutes.
● After a user logs in to the WebUI, if another user logs in with the same user name, the
current account will be logged out.
● Change the password after your first login to prevent unauthorized access. You can
change the password over the user management menu on the configuration page.
Figure
Copyright © Huawei Technologies Co., Ltd.
User Rights
- Only browses the system running
information.
5-1.
5 User Interface
69