Huawei SmartLi 2.0 User Manual page 85

SmartLi 2.0
User Manual
Table 5-11 System Settings
Item
Battery cabinet
quantity
Pooling
Number of pool
systems
Pooling system
No.
Issue 03 (2020-08-07)
operation results are the same, the two IP addresses are in the same
subnet.
AND operation rule: 1 AND 1 = 1, 1 AND 0 = 0, 0 AND 1 = 0, 0 AND 0 =
0. That is when the corresponding bits are both 1, the result is 1. In other
cases, the result is 0.
Table 5-10 Bitwise AND operation example
-
PC IP address/SmartLi
IP address
Subnet mask
(255.255.255.192)
Bitwise AND
operation result
– Automatic: The MDU automatically searches for available IP addresses in
the connected network. Ensure that the MDU and PC are on the same
network segment.
NO TE
● After you restart the device, IP address allocation changes back to Manual. The IP
address is set to the IP address set previously.
● Ensure that the UPS IP address is unique on the network segment. Otherwise, the
WebUI display function may not function properly.
Description
Specifies the number of
battery cabinets connected in
parallel.
If this parameter is set to
Disable, the system does not
allow battery pooling. If this
parameter is set to Enable,
the system allows battery
pooling.
Number of battery systems
in the pooling scenario.
ID of a battery system in the
pooling scenario.
Copyright © Huawei Technologies Co., Ltd.
PC IP address
(182.98.225.125)
10110110.01100010.1
1100001.01111101
11111111.11111111.1
1111111.11000000
10110110.01100010.1
1100001.01000000
Default
Value
1
Disable
2
1
5 User Interface
UPS IP address
(182.98.225.112)
10110110.01100010.1
1100001.01110000
11111111.11111111.1
1111111.11000000
10110110.01100010.1
1100001.01000000
Value Range
1–15
Disable, Enable
1–8
1–2
78