Banner SureCross DX80 Series Manual page 3

SureCross™ FlexPower™ Data Radio
1. Rotary Switch 1 (left)
Rotary Switch 2 (right)
2. Push Button 1
3. Push Button 2
4. LED 1 and 2
6. LCD Display
6. 5-Pin M12 Euro-style
quick-disconnect port
2
P/N 132031 rev. E
Data Radio Front Panel Interface
Sets the network ID (NID) to a hexidecimal value from 0 to F, for a total of 16 network IDs. A master
device and its corresponding slaves must be assigned the same network ID.
Sets the device role (master or slave). Set the master device to 0 and set the slave devices all to 1.
Only one device within each network is the master.
Single-click to advance across all top-level data radio menus. Single-click to move down interactive
menus, once a top-level menu is chosen.
Double-click to select a menu and to enter manual scrolling mode. Double-click to move up one
level at a time.
Provide real-time feedback to the user regarding RF link status, serial communications activity, and
the error state.
Six-character display provides run mode user information such as the number of packets sent
and received. This display allows the user to conduct a site survey and modify other data radio
configuration parameters without the use of a PC or other external software interfaces.
The Euro-style power is used for serial connections and power.
1
2
3
4
5
6
Banner Engineering Corp. • Minneapolis, MN U.S.A
www.bannerengineering.com • Tel: 763.544.3164