Table of Contents
Advertisement
11
ENVIRONMENTAL REQUIREMENTS
Required floor
Properties
The Nipper V2 can bridge inequalities up to 5 mm and a maximum gradient of 3%. It is important to reduce the
expansion rate of the connections accordingly, depending on their condition.
Brake test: The maximum load of the vehicle is determined for this purpose. The vehicle must be accelerated at
full speed and then activate the rear bumper, while the vehicle must not lose grip.
After the test, the load must remain stable and stop without slipping on the vehicle.
Cleaning
The roadway must be kept clean and free of objects. If necessary, carry out cleaning with a brush several times
a day.
Under no circumstances may the track be cleaned wet during operation!
Operator staff
The operator staff must be familiar with the operation of the device.
Operation
The distributor must ensure that the equipment that prevents unauthorised use is available for maintenance and
manual operation.
Mixed operation with people
People who are in the vicinity of the system or who can enter the system must be informed about this and the
safety guidelines.
INSTALLATION INSTRUCTIONS NIPPER - JULY 2020
36
Advertisement
Table of Contents
