F3-Design NIPPER Installation Instructions Manual page 18

[3] Rotating drive units
In order to optimally protect the floor, the vehicle has two turntables per chassis unit. This allows the vehicle to be
manoeuvred from a standing position in all directions. The 80 mm wheels are driven independently by a servo
engine.
[4] Lifting mechanism
For even weight distribution on complex loads.
[5] Hydraulic unit
The load is absorbed hydraulically.
[6] Load-handling forks
The load handling device connects the two independent chassis units.
[7] Assembly sheet
This is the safety control for evaluation of the safety laser scanner.
[8] Safety laser scanner
For mixed operations, a safety laser scanner with eight (8) field sets has been installed, which guarantees the
highest possible level of safety.
INSTALLATION INSTRUCTIONS NIPPER - JULY 2020
Figure 8: Safety laser
18