F3-Design NIPPER Installation Instructions Manual page 22

LiFePO4 battery pack
The Nipper V2 is attached with two (2) separate -LiFePO4- battery packs with a nominal power of 420 W/h.
Figure 9: W420AH battery pack
Note: The battery must be stored with 30% charge. If the battery has been stored for more than six months, it
must be fully discharged and then recharged to 30%.
Attention: Attention is paid to the GDV brochure about loss prevention of the German Insurance Industry.
INSTALLATION INSTRUCTIONS NIPPER - JULY 2020 22