Intrinsyc Open-Q 212A Quick Start Manual page 2

Development Kit Setup
1. At a static-safe workstation, remove the development kit board
carefully from the anti static bag.
2. Connect the serial debug USB (17) to your favorite terminal program if
you wish to see boot messages (FTDI UART — USB bridge driver
required on PC).
2. Connect the Power Adapter to the 12V DC Jack (11) and then press
and hold the POWER ON button (26) for a few seconds until the blue
LED starts blinking to indicate the board is booting up.
3. Documentation and software
To access the documentation (schematics, user guides, datasheets,
programming guides, tech notes...), platform BSP software and much more,
please register at:
http://tech.intrinsyc.com
™
Open-Q 212A Development Kit
Quick Start Guide
Specifications are subject to change - Open-Q 212A DK QSG Rev. 1.0
Development Kit Support
Should you require more information or assistance, you can contact us at:
https://www.intrinsyc.com/contact-support
Intrinsyc also provides technical information and videos on Snapdragon processors at:
https://www.intrinsyc.com/resources
Should you require additional technical support for your Development Kit you can
easily purchase a technical support package from the Intrinsyc store:
http://shop.intrinsyc.com/collections/technical-support-packages
Thank you for purchasing the Open-Q 212A Development Kit
The Intrinsyc Team