Notes On Possible Property Damage - Samson 3256 Mounting And Operating Instructions

In combination with an actuator, e.g. a type 3271 or type 3277 pneumatic actuator
Table of Contents

Advertisement

Safety instructions and measures
WARNING
!
Risk of personal injury due to residual process medium in the valve.
While working on the valve, residual medium can flow out of the valve and, depending
on its properties, cause personal injury, e.g. (chemical) burns.
Î If possible, drain the process medium from all the plant sections affected and the
valve.
Î Wear protective clothing, safety gloves, respiratory protection and eye protection.
Risk of personal injury through incorrect operation, use or installation as a result of
information on the valve being illegible.
Over time, markings, labels and nameplates on the valve may become covered with dirt
or become illegible in some other way. As a result, hazards may go unnoticed and the
necessary instructions not followed. There is a risk of personal injury.
Î Keep all relevant markings and inscriptions on the device in a constantly legible
state.
Î Immediately renew damaged, missing or incorrect nameplates or labels.

1.3 Notes on possible property damage

NOTICE
!
Risk of valve damage due to contamination (e.g. solid particles) in the pipeline.
The plant operator is responsible for cleaning the pipelines in the plant.
Î Flush the pipelines before start-up.
Risk of valve damage due to unsuitable medium properties.
The valve is designed for a process medium with defined properties.
Î Only use the process medium specified for sizing.
1-6
EB 8065 EN

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

3241 series3241 - pneumatic - jis3241 - pneumatic - ansi3256 series3256 - electric - ansi3256 - pneumatic - ansi

Table of Contents