Jura X8 Instructions For Use Manual page 24

4 Permanent settings in programming mode
Product
'Latte macchiato'
'1 portion milk'
'Jug of coffee'
'Hot water',
'Hot water for
green tea'
24
Coffee Amount
strength
10 levels Water: 0.5 oz – 8.0 oz
(25 ml – 240 ml)
Milk foam: 0 sec. – 120 sec.
Milk: 0 sec. – 120 sec.
Interval: 0 sec. – 60 sec.
– Milk foam: 0 sec. – 120 sec.
Milk: 0 sec. – 120 sec.
10 levels Water: 25 ml – 240 ml
Number of strokes (1–5; set
number is displayed during
preparation)
– Water: 0.5 oz – 15.0 oz
(25 ml – 450 ml)
E When preparing double products, the amounts set for the
single product are doubled. The temperature of the single
product remains unchanged.
Permanent settings in programming mode always follow the same
model.
Example: Proceed as follows to change the coffee strength for one
coffee.
T Press the
T Press the
T Press the
'Expert mode'
E Next select the button of the product for which you would like
to make settings. No product is prepared at this point.
E To display more products, press the
T Press the
'Coffee'
T Press the
'Coffee'
More settings
Milk and milk foam temperature,
Temperature (normal, high),
position
Milk and milk foam temperature,
position
Temperature (normal, high),
position
Temperature (low, normal, high),
position
' Pc ' button.
' T ' button several times until
'Expert mode' button.
'Coffee' button.
'Coffee strength' button.
and the coffee strength is displayed.
'3/5' is displayed.
' T ' button (bottom right).